Download Ampere v4.05 APK
Target: Android 13 (API 33)
What's new in Ampere v4.05
v4.05
* Android 13 release
* Bug fixes and minor enhancements
Ampere FAQ: goo.gl/R8XgXX
For more info please read the change history: Settings => About Ampere => Change history
Note: When ampere would stuck in "measuring" state (after a firmware upgrade) please clear Amperes's app cache.
1.) Open the "Android Settings app" => "Apps" => "Ampere"
2.) Clear all data under the "Storage" menu
3.) Restart Ampere
About Ampere v4.05
Did you ever felt, that one Charger/USB cable set charges your device really fast and the other not? Now, you can prove this with Ampere.
Measure the charging and discharging current of your battery.
PRO features:
- Widgets
- Notification
- Alerts on device
- Alerts on Android Wear
Not every device is supported because there are devices which lacks an appropriate measurement chip (or the interface) and they can not be supported at all. Please read the list of not supported phones at the end of the description.
The app is not meant to be mA accurate. It is only good for evaluate which Charger/USB cable combo is working the best for you on the same device.
----
Please read also the FAQ: goo.gl/R8XgXX
----
Start the app and wait ca. 10 seconds ("measuring" is on the display). After this time, the charging or discharging current will be shown.
The current depends on many things:
- Charger (USB/AC/Wireless)
- USB cable
- Phone type
- Current tasks running
- Display brightness
- WiFi state
- GPS state
Please don't use the readings on this app as concrete science. However, the readings are good enough to relatively measure how various chargers and USB cables fair on the same device.
If the app shows 0mA all the time, please use the settings option "Old measurement method". You can force the app with it to use the old measurement interface, if the Lollipop device has at least one.
Unfortunately some Samsung devices don't give correct (measured) values (e.g.: S5), just the maximum possible charging current with the actual USB cable/charger configuration. This is a firmware problem.
----
Background info: The app measures the charging/discharging current of the battery. If your phone is not connected to a charger, you see the discharging current which is negative. If you connect a charger then the current what the charger gives will be used to supply your phone and the remaining power will be charged into the battery.
If your phone consumes 300 mA without a charger connected (-300mA on the display), then a 500 mA charger will charge your battery maximum with 200 mA current (200mA on display).
----
Technical info: The displayed current is an average value from 50 measurements minus the 10 upper values and the 10 lower values. The displayed current can be shaky or unstable or even zero which means, that the Android system provides unstable values. Every company uses different battery types and other hardware making it difficult to get accurate results about your charger.
----
LiPo batteries don't draw the maximum for the full time it takes to charge the phone. If your battery is charged almost full then the charging current will be much less as by lower battery levels.
- A graph explaining LiPo charge stages: batteryuniversity.com/_img/content/ion1.jpg
- Dave's (EEVBlog) LiPo Charging Tutorial: youtu.be/A6mKd5_-abk
----
Phones/ROMS compatible only with "Old measurement method" switched on and selected the right "Measurement interface":
➤ HTC One M7 / M8
➤ LG G3
Phones/ROMS reported to be not working with this app:
➤ Galaxy Grand Prime - fortuna3gdtv
➤ Galaxy Note2 - t03g, t03gchn, t03gchnduos, t03gcmcc, t03gctc, t03gcuduos
➤ Galaxy S3 - d2att, d2spr, d2vmu
➤ Galaxy Tab4 7.0 - degas3g
➤ HTC Desire 510 - htc_a11ul8x26
➤ HTC One S (ville), X (endeavoru), XL (evita)
➤ HTC Sensation 4G - pyramid
Please do not give wrong rating, if your phone is one of the above. Not the app is wrong, but your phone does not support this kind of measurement yet.
If the app doesn't work on your device with pre-Lollipop Android version, then please read the first and the second posts in this XDA developer forum thread: goo.gl/pZqJg8 . Please post your problem with screenshots in the XDA thread.
Please read also the FAQ: goo.gl/R8XgXX
Ampere v4.05 variants
This release may come in several variants. Consult our handy FAQ to see which download is right for you.
Version:v4.08(270) for Android 4.4+ (Kitkat, API 19)
Uploaded:June 27, 2023 at 9:41PM UTC
File size:11.94 MB
Downloads:976
Version:v4.07(269) for Android 4.4+ (Kitkat, API 19)
Uploaded:March 27, 2023 at 6:34AM UTC
File size:11.62 MB
Downloads:241
Version:v4.06(268) for Android 4.4+ (Kitkat, API 19)
Uploaded:March 12, 2023 at 5:09PM UTC
File size:11.62 MB
Downloads:109
Version:v4.05(267) for Android 4.4+ (Kitkat, API 19)
Uploaded:January 8, 2023 at 7:54AM UTC
File size:11.28 MB
Downloads:646
Version:v4.04(266) for Android 4.4+ (Kitkat, API 19)
Uploaded:November 22, 2022 at 5:18AM UTC
File size:11.26 MB
Downloads:391
Version:v4.03(265) for Android 4.4+ (Kitkat, API 19)
Uploaded:November 8, 2022 at 10:05PM UTC
File size:11.09 MB
Downloads:75
Version:v4.01(263) for Android 4.4+ (Kitkat, API 19)
Uploaded:August 29, 2022 at 8:33PM UTC
File size:11.16 MB
Downloads:475
Version:v4.17
Uploaded:June 27, 2024 at 5:13AM UTC
File size:12.13 MB
Downloads:586
Version:v4.16
Uploaded:May 8, 2024 at 10:11PM UTC
File size:12 MB
Downloads:317
Version:v4.15
Uploaded:February 19, 2024 at 8:38PM UTC
File size:12.06 MB
Downloads:589
Version:v4.14
Uploaded:January 4, 2024 at 6:00AM UTC
File size:11.9 MB
Downloads:372
Version:v4.12
Uploaded:October 25, 2023 at 6:11PM UTC
File size:11.73 MB
Downloads:472
Version:v4.10
Uploaded:October 23, 2023 at 8:03PM UTC
File size:11.72 MB
Downloads:42
Version:v4.08
Uploaded:June 27, 2023 at 9:41PM UTC
File size:11.94 MB
Downloads:976
Version:v4.07
Uploaded:March 27, 2023 at 6:34AM UTC
File size:11.62 MB
Downloads:241
Version:v4.06
Uploaded:March 12, 2023 at 5:09PM UTC
File size:11.62 MB
Downloads:109
Version:v4.05
Uploaded:January 8, 2023 at 7:54AM UTC
File size:11.28 MB
Downloads:646